Qubino - 0-10 V Dimmer for LED Low Voltage Dimmable Fixtures

  • 405.00 SR
    Unit price per 
Shipping calculated at checkout.


Flush Dimmer 0-10V

The smart way to control your lights

 

Qubino - 0-10 V Dimmer for LED Low Voltage Dimmable Fixtures

Brighten up...

Are your lights powered by a LED driver 0-10V? Are you looking for a solution to control them wirelessly, using your smartphone from your comfortable sofa?

 

Qubino - 0-10 V Dimmer for LED Low Voltage Dimmable Fixtures

...and lighten up!

Qubino Flush Dimmer 0-10V gives you an opportunity to connect your lights, running on0-10V, to a smart home system and control them wirelessly.

Are your lights powered by a LED driver 0-10V?

Qubino Flush Dimmer 0-10V connects your lights to a smart home system and control them wirelessly.

WHAT DOES IT DO?

The only Z-Wave 0-10 V dimming controller. Connect it to a 0-10 LED driver for remote Z-Wave control of your low-voltage fixtures.

 WHAT ELSE DO I NEED?

A 12-24VDC power supply to power the module. If you’re adding manual control from a wall switch, make sure it’s either a momentary push-button switch or a simple on/off switch, NOT a dimmer (VERY IMPORTANT). You'll need a compatible Z-Wave hub for wireless control (scroll down for details). Alexa is NOT a Z-Wave hub.

WHY NOT GET A WALL Z-WAVE DIMMER?

So you can actually control your low-voltage lights! Regular Z-Wave wall switches won’t play well with LED drivers with 0-10 V control so you won’t be able to use them here at all.

HOW IS IT BETTER?

Made in Italy from top quality components that will last. It’s extremely small and will fit very tight cans. If your Z-Wave hub supports advanced parameter input (you’ll need a custom handler for SmartThings), you'll be able to set minimum and maximum dimming levels, adjust the ramp rate, or add double-click to full brightness.

IS THERE TECH SUPPORT?

Yes! You can always contact the seller or manufacturer for help with wiring or programming your Qubino 0-10 V dimmer. You'll get additional instructions and step-by-step directions for any type of installation.

 Product description

NOTE: Check the specifications of your LED driver carefully before installing the Qubino 0-10 V Dimmer. Do NOT connect the Qubino 0-10V Dimmer to 110 VAC.


SPECIFICATIONS:

Model Number: ZMNHVD3

Z-Wave Signal Frequency: 908.42 MHz

Power: 12-24 VDC

Max Sinking Control Voltage: -20/ +20VDC

Max Sourcing Control Voltage: 0-11VDC

Power Consumption: 0.5 W

Z-Wave Range: Up to 130 feet line of sight

Operating Temperature: 14-104° F

Installation and Use: Indoor only

COMPATIBLE HUBS:

Do NOT buy if your controller is not listed below. Contact Seller first.

Fibaro Home Center Lite

Home Assistant

HomeSeer

Samsung SmartThings Hub with custom device handler - Contact Seller for Instructions

VeraEdge

VeraPlus

VeraSecure

Product information

Technical Details

Item model number ZMNHVD3
Style 0-10V Dimming Controller
Number Of Pieces 1
Batteries Required? No
English
English