Qubino - Flush Dimmer - Micro Dimmer

Flush Dimmer

The smart way to control your lights

Brighter or darker lighting?

Does your living room have proper lighting so you can enjoy a good book or a good film on TV?

Remotely control dimmable lights

With Qubino Flush Dimmer you can play with different types of dimmable bulbs and set their brightness level, using your smartphone. No need to walk to the light switch every time, do it from the comfort of your sofa.

Quick and easy installation

1. Install Qubino Flush Dimmer behind the wall light switch
2. Configure it through your Z-Wave gateway
3. Control your lights using your smartphone

Additional benefits to make your home smarter

Qubino Flush Dimmer has an option to connect a temperature sensor, that measures and reports the room temperature to your smartphone. This allows you to create different scenarios and have your home completely under control.

The Qubino Flush Dimmer is the first MOSFET-switching lights device that also supports control of low-voltage halogen lamps with the electronic transformer, dimmable compact fluorescent lights, and dimmable LED bulbs. It also measures the power consumption of electrical devices and supports the connection of a digital temperature sensor.

The Qubino Flush Dimmer can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.7 W.

The Qubino Flush Dimmer can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenes. Every device also acts as a repeater in order to improve the range and stability of the Z-Wave network.

Extremely small size and a specially designed casing mean that connecting the device inside a flush mounting box is simplicity itself. The installation process tested and approved by professional electricians, consists of just three simple steps:

1, Remove the switches from the box and disconnect the wires.

2, Connect the wires to the Qubino device and insert it in the box.

3, Fix the switches to the box.

Warning:

Danger of electrocution!

All works on the device may be performed only by a qualified and licensed electrician. Observe national regulations.

Even when the device is turned off, the voltage may be present at its terminals. Any works introducing changes into the configuration of connections or the load must be always performed with disconnected voltage (disable the fuse).

Product description

NOTE: This module requires a NEUTRAL wire. Check if you have power and neutral in the box FIRST. Do NOT connect it to dimmer switches or ceiling fans.

SPECIFICATIONS:

• Model Number: ZMNHDD3
• Z-Wave Signal Frequency: 908.42 MHz
• Power: 120 VAC
• Maximum Load: 0.6 A / 65 W incandescent (15 W LED's)
• Power Consumption: 0.7 W
• Z-Wave Range: Up to 130 feet line of sight
• Operating Temperature: 14-104° F
• Installation and Use: Indoor only

COMPATIBLE HUBS:

• Domoticz
• Fibaro Home Center Lite
• Home Assistant
• HomeSeer
• Samsung SmartThings Hub with custom device handler - Contact Seller for Instructions
• VeraEdge
• VeraPlus
• VeraSecure
• Wink
• Z-Wave Me

Technical Details